3Com Wireless LAN WX1200 - Manual (Page 620)

620 C HAPTER 24: B OOT P ROMPT C OMMANDS
autoboot Displays or changes the state of the autoboot option. The autoboot
option controls whether a WX switch automatically boots a system image
after initializing the hardware, following a system reset or power cycle.
Syntax — autoboot [ON | on | OFF | off]
„
ON — Enables the autoboot option.
„
on — Same effect as ON .
„
OFF — Disables the autoboot option.
„
off — Same effect as OFF .
Defaults — The autoboot option is enabled by default.
Access — Boot prompt.
History —Introduced in MSS Version 3.0.
Examples — The following command displays the current setting of the
autoboot option:
boot> autoboot
The autoboot flag is on.
See Also
„
boot on page 621
Boot Profile Management display on page 628
create on page 624
Boot Profile
Management, cont. next on page 633
change on page 623
delete on page 625
Diagnostics diag on page 627
test on page 635
Table 111 Boot Prompt Commands by Usage (continued)
Type Command