3Com Wireless LAN WX1200 - Manual (Page 273)

10
N
ETWORK
D
OMAIN
C
OMMANDS
Use Network Domain commands to configure and manage Network
Domain groups.
A Network Domain is a group of geographically dispersed Mobility Domains
that share information among themselves over a WAN link. This shared
information allows a user configured on a WX switch in one Mobility Domain
to establish connectivity on a WX switch in another Mobility Domain elsewhere
in the same Network Domain. The WX switch forwards the user traffic by
creating a VLAN tunnel to a WX switch in the remote Mobility Domain.
In a Network Domain, one or more WX switches serve as a seed switch.
At least one of the Network Domain seeds maintains a connection with
each of the member WX switches in the Network Domain. The Network
Domain seeds share information about the VLANs configured on their
members, so that all the Network Domain seeds have a common
database of VLAN information.
Network Domain
Commands by
Usage This chapter presents Network Domain commands alphabetically. Use
Table 47 to locate commands in this chapter based on their use.
Table 47 Network Domain Commands by Usage
Type Command
Network Domain set network-domain mode seed domain-name on
page 282
set network-domain mode member seed-ip on
page 280
set network-domain peer on page 281
clear network-domain on page 274
clear network-domain mode on page 275
10