3Com Wireless LAN WX1200 - Manual (Page 221)

display aaa 221
See Also
„
set accounting {admin | console} on page 225
„
set authentication admin on page 229
„
set authentication console on page 231
„
set authentication dot1x on page 233
deadtime Number of minutes the WX switch waits after determining
a RADIUS server is unresponsive before trying to reconnect
with this server. During the dead time, the RADIUS server
is ignored by the WX switch. The default is 0 minutes.
key Shared secret key, or password, used to authenticate to a
RADIUS server. The default is no key.
author-pass Password used for outbound authentication to a RADIUS
server, used in conjunction with a last-resort username. By
default, a MAC user’s MAC address is also used as that
user’s password, and no global password is set.
Radius Servers Information about active RADIUS servers.
Server Name of each RADIUS server currently active.
Addr IP address of each RADIUS server currently active.
Ports UDP ports that the WX switch uses for authentication
messages and for accounting records.
T/o Setting of timeouts on each RADIUS server currently active.
Tries Number of retransmissions configured for each RADIUS
server currently active. The default is 3 times.
Dead Length of time until the server is considered responsive
again.
State Current state of each RADIUS server currently active:
„
UP (operating)
„
DOWN (unavailable)
Server groups Names of RADIUS server groups and member servers
configured on the WX switch.
Web Portal State of the WebAAA feature:
„
enabled
„
disabled
set commands List of commands used to configure AAA on the WX
switch.
user and user group
profiles List of user and user group profiles stored in the local
database on the WX switch.
Table 42 display aaa Output (continued)