3Com Wireless LAN WX1200 - Manual (Page 383)

set service-profile rsn-ie 383
Examples — The following command configures service profile sp3 to
use a raw PSK with PSK clients:
WX4400# set service-profile sp3 psk-raw c25d3fe4483e867
d1df96eaacdf8b02451fa0836162e758100f5f6b87965e59d
success: change accepted.
See Also
„
set mac-user attr on page 249
„
set service-profile auth-psk on page 375
„
set service-profile psk-phrase on page 381
„
set service-profile wpa-ie on page 391
set service-profile
rsn-ie Enables the Robust Security Network (RSN) Information Element (IE).
The RSN IE advertises the RSN authentication methods and cipher suites
supported by radios in the radio profile mapped to the service profile.
Syntax — set service-profile name rsn-ie {enable | disable}
„
name — Service profile name.
„
enable — Enables the RSN IE.
„
disable — Disables the RSN IE.
Defaults — The RSN IE is disabled by default.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — The following command enables the RSN IE in service
profile sprsn:
WX4400# set service-profile sprsn rsn-ie enable
success: change accepted.
See Also
„
set service-profile cipher-ccmp on page 377