3Com Wireless LAN WX1200 - Manual (Page 378)

378 C HAPTER 11: M ANAGED A CCESS P OINT C OMMANDS
Examples — The following command configures service profile sp2 to
use CCMP encryption:
WX4400# set service-profile sp2 cipher-ccmp enable
success: change accepted.
See Also
„
set service-profile cipher-tkip on page 378
„
set service-profile cipher-wep104 on page 379
„
set service-profile cipher-wep40 on page 380
„
set service-profile wpa-ie on page 391
set service-profile
cipher-tkip Disables or reenables Temporal Key Integrity Protocol (TKIP) encryption in
a service profile.
Syntax — set service-profile
name cipher-tkip {enable | disable}
„
name — Service profile name.
„
enable — Enables TKIP encryption for WPA clients.
„
disable — Disables TKIP encryption for WPA clients.
Defaults — When the WPA IE is enabled, TKIP encryption is enabled by
default.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Usage — To use TKIP, you must also enable the WPA IE.
Examples — The following command disables TKIP encryption in service
profile sp2:
WX4400# set service-profile sp2 cipher-tkip disable
success: change accepted.
See Also
„
set service-profile cipher-ccmp on page 377
„
set service-profile cipher-wep104 on page 379
„
set service-profile cipher-wep40 on page 380