3Com Wireless LAN WX1200 - Manual (Page 396)

396 C HAPTER 12: STP C OMMANDS
„
vlan vlan-id — VLAN name or number. MSS resets the cost for only
the specified VLAN.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Usage — MSS does not change a port’s cost for VLANs other than the
one(s) you specify.
Examples — The following command resets the STP cost for port 2 in
VLAN sunflower:
WX4400# clear spantree portvlancost 2 vlan sunflower
success: change accepted.
See Also
„
clear spantree portcost on page 394
„
display spantree on page 398
„
display spantree portvlancost on page 403
„
set spantree portcost on page 414
„
set spantree portvlancost on page 417
clear spantree
portvlanpri Resets to the default value the priority of a network port or ports for
selection as part of the path to the STP root bridge, on one VLAN or all
VLANs.
Syntax — clear spantree portvlanpri port-list {all | vlan
vlan-id}
„
port-list — List of ports. The port priority is reset to 32 (the default)
on the specified ports.
„
all — Resets the priority for all VLANs.
„
vlan vlan-id — VLAN name or number. MSS resets the priority for
only the specified VLAN.
Defaults — None.
Access — Enabled.