3Com Wireless LAN WX1200 - Manual (Page 224)

224 C HAPTER 8: AAA C OMMANDS
display location
policy Displays the list of location policy rules that make up the location policy
on an WX switch.
Syntax — display location policy
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — The following command displays the list of location policy
rules in the location policy on an WX switch:
WX4400 display location policy
Id Clauses
----------------------------------------------------------------
1) deny if user eq *.theirfirm.com
2) permit vlan guest_1 if vlan neq *.wodefirm.com
3) permit vlan bld4.tac inacl tac_24.in if user eq *.ny.wodefirm.com
See Also
„
clear location policy on page 210
„
set location policy on page 244
display
mobility-profile Displays the named Mobility Profile. If you do not specify a Mobility
Profile name, this command shows all Mobility Profile names and port
lists on the WX.
Syntax — display mobility-profile [name]
„
name — Name of an existing Mobility Profile.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.