3Com Wireless LAN WX1200 - Manual (Page 164)

164 C HAPTER 7: IP S ERVICES C OMMANDS
set ip alias Configures an alias, which maps a name to an IP address. You can use
aliases as shortcuts in CLI commands.
Syntax — set ip alias name ip-addr
„
name — String of up to 32 alphanumeric characters, with no spaces.
„
ip-addr — IP address in dotted decimal notation.
Defaults — None.
Access — Enabled.
History— Introduced in MSS Version 3.0.
Examples — The following command configures the alias HR1 for IP
address 192.168.1.2:
WX4400# set ip alias HR1 192.168.1.2
success: change accepted.
See Also
„
clear ip alias on page 128
„
display ip alias on page 143
set ip dns Enables or disables DNS on a wireless LAN switch.
Syntax — set ip dns {enable | disable}
„
enable — Enables DNS.
„
disable — Disables DNS.
Defaults — DNS is disabled by default.
Access — Enabled.
History— Introduced in MSS Version 3.0.
Examples — The following command enables DNS on a WX switch:
WX1200# set ip dns enable
Start DNS Client