3Com Wireless LAN WX1200 - Manual (Page 523)

display sessions 523
„
telnet — Displays sessions for all users with administrative access to
the WX switch through a Telnet connection.
„
telnet client — Displays Telnet sessions from the CLI to remote
devices.
Defaults — None.
Access — All, except for display sessions telnet client, which has
enabled access.
History —Introduced in MSS Version 3.0.
Examples — To view information about sessions of administrative users,
type the following command:
WX4400> display sessions admin
Tty Username Time (s) Type
------- -------------------- -------- ----
tty0 3644 Console
tty2 tech 6 Telnet
tty3 sshadmin 381 SSH
3 admin sessions
To view information about console users’ sessions, type the following
command:
WX4400> display sessions console
Tty Username Time (s)
------- -------------------- --------
console 8573
1 console session
To view information about Telnet users sessions, type the following
command:
WX4400> display sessions telnet
Tty Username Time (s)
------- -------------------- --------
tty2 sea 7395