3Com Wireless LAN WX1200 - Manual (Page 293)

display {ap | dap} config 293
See Also
„
display dap connection on page 313
„
display dap global on page 314
„
display dap unconfigured on page 316
„
display radio-profile on page 317
„
set dap on page 81
„
set port type ap on page 91
„
set {ap | dap} bias on page 328
„
set {ap | dap} group on page 332
„
set {ap | dap} name on page 333
„
set {ap | dap} upgrade-firmware on page 346
„
set {ap | dap} radio mode on page 341
„
set {ap | dap} radio antennatype on page 334
„
set {ap | dap} radio channel on page 339
„
set {ap | dap} radio radio-profile on page 343
„
set {ap | dap} radio tx-power on page 344
auto-tune
max-retransmissions Maximum percentage of packets that can be retransmitted
by a client before RF Auto-Tuning increases power.
Note: Only packets that are received twice by the MAP are
counted as retransmissions. If a client retransmits a packet
but the MAP receives only a single copy of the packet, the
packet is not counted as a retransmission.
Table 51 Output for display ap config (continued)
Field Description