3Com Wireless LAN WX1200 - Manual (Page 163)

set interface status 163
Examples — The following command enables the DHCP server on VLAN
red-vlan to serve addresses from the 192.168.1.5 to 192.168.1.25 range:
WX1200# set interface red-vlan ip dhcp-server enable start
192.168.1.5 stop 192.168.1.25
success: change accepted.
See Also
„
display dhcp-server on page 140
set interface status Administratively disables or reenables an IP interface.
Syntax — set interface vlan-id status {up | down}
„
vlan-id — VLAN name or number.
„
up — Enables the interface.
„
down — Disables the interface.
Defaults — IP interfaces are enabled by default.
Access — Enabled.
History— Introduced in MSS Version 3.0.
Examples — The following command disables the IP interface on VLAN
mauve:
WX4400# set interface mauve status down
success: set interface mauve to down
See Also
„
clear interface on page 127
„
display interface on page 142
„
set interface on page 160