3Com Wireless LAN WX1200 - Manual (Page 438)

438 C HAPTER 13: IGMP S NOOPING C OMMANDS
See Also
„
set igmp lmqi on page 434
„
set igmp qi on page 439
„
set igmp qri on page 440
„
set igmp querier on page 441
„
set igmp mrouter on page 435
„
set igmp rv on page 442
set igmp
proxy-report Disables or reenables proxy reporting by a WX on one VLAN or all VLANs.
Syntax — set igmp proxy-report {enable | disable}
„
vlan vlan-id — VLAN name or number. If you do not specify a
VLAN, proxy reporting is disabled or reenabled on all VLANs.
„
enable — Enables proxy reporting.
„
disable — Disables proxy reporting.
Defaults — Proxy reporting is enabled on all VLANs by default.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — Proxy reporting reduces multicast overhead by sending only
one membership report for a group to the multicast routers and
discarding other membership reports for the same group. If you disable
proxy reporting, the WX sends all membership reports to the routers,
including multiple reports for the same group.
Examples — The following example disables proxy reporting on VLAN
orange:
WX1200# set igmp proxy-report disable vlan orange
success: change accepted.
See Also
„
set igmp rv on page 442