3Com Wireless LAN WX1200 - Manual (Page 177)

set snmp notify profile 177
„
set ip snmp server on page 169
„
set snmp notify target on page 181
„
set snmp notify profile on page 177
„
set snmp protocol on page 186
„
set snmp security on page 187
„
set snmp usm on page 188
„
display snmp community on page 151
set snmp notify
profile Configures an SNMP notification profile. A notification profile is a named
list of all the notification types that can be generated by a switch, and for
each notification type, the action to take (drop or send) when an event
occurs.
You can configure up to ten notification profiles.
Syntax — set snmp notify profile {default | profile-name}
{drop | send} {notification-type | all}
„
default | profile-name — Name of the notification profile you are
creating or modifying. The profile-name can be up to 32
alphanumeric characters long, with no spaces. To modify the default
notification profile, specify default.
„
drop | send — Specifies the action that the SNMP engine takes with
regard to the notifications you specify with notification-type or all.
„
notification-type — Name of the notification type:
„
APBootTraps—Generated when a MAP access point boots.
„
ApNonOperStatusTraps—Generated to indicate a MAP radio is
nonoperational.
„
ApOperRadioStatusTraps—Generated when the status of a
MAP radio changes.
„
APTimeoutTraps—Generated when a MAP access point fails to
respond to the WX switch.
„
AuthenTraps—Generated when the WX switch’s SNMP engine
receives a bad community string.
„
AutoTuneRadioChannelChangeTraps—Generated when the
RF Auto-Tuning feature changes the channel on a radio.