3Com Wireless LAN WX1200 - Manual (Page 54)

54 C HAPTER 3: S YSTEM S ERVICE C OMMANDS
Usage — The license key is shipped with the switch. To obtain the
activation key, access the 3Com web site. Each license and activation key
pair allows the switch to actively manage an additional 24 MAPs. You can
install up to three upgrade license and activation key pairs, to actively
manage up to 96 MAPs.
Examples — To install an upgrade license and activation key, type the
following command:
WX4400# set license WXL-076E-93E9-62DA-54D8
WXA-3E04-4CC2-430D-B508
Serial Number : M8XE4IBB8DB10
License Number : 245
License Key : WXL-076E-93E9-62DA-54D8
Activation key : WXA-3E04-4CC2-430D-B508
Feature : 24 additional ports
Expires : Never
48 ports are enabled
success: license was installed
The additional ports refers to the number of additional MAPs the switch
can boot and actively manage.
See Also
„
display license on page 42
set prompt Changes the CLI prompt for the WX switch to a string you specify.
Syntax — set prompt string
„
string — Alphanumeric string up to 32 characters long. To include
spaces in the prompt, you must enclose the string in double quotation
marks (“”).
Defaults — The factory default for the WX switch name is the model
number (WX1200 for the 3Com Wireless LAN Switch WX1200, WX4400
for the 3Com Wireless LAN Controller WX4400).
Access — Enabled.
History — Introduced in MSS Version 3.0.