3Com Wireless LAN WX1200 - Manual (Page 489)

clear radius server 489
clear radius server Removes the named RADIUS server from the WX configuration.
Syntax — clear radius server server-name
„
server-name — Name of a RADIUS server configured to perform
remote AAA services for the WX switch.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — The following command removes the RADIUS server rs42
from a list of remote AAA servers:
WX4400# clear radius server rs42
success: change accepted.
See Also
„
display aaa on page 219
„
set radius server on page 494
clear server group Removes a RADIUS server group from the configuration, or disables load
balancing for the group.
Syntax — clear server group group-name [load-balance]
„
group-name — Name of a RADIUS server group configured to perform
remote AAA services for WX switches.
„
load-balance — Ability of group members to share demand for
services among servers.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Usage — Deleting a server group removes the server group from the
configuration. However, the members of the server group remain.