3Com Wireless LAN WX1200 - Manual (Page 627)

diag 627
Examples — The following command displays the current setting of the
DHCP option:
boot> dhcp
DHCP is currently enabled.
The following command disables the DHCP option:
boot> dhcp
DHCP is currently disabled.
See Also
„
boot on page 621
diag Accesses the diagnostic mode.
Syntax — diag
Defaults — The diagnostic mode is disabled by default.
Access — Boot prompt.
History —Introduced in MSS Version 3.0.
Usage — Access to the diagnostic mode requires a password, which is
not user configurable. Use this mode only if advised to do so by 3Com.
dir Displays the boot code and system image files on a WX switch.
Syntax — dir [c: | d: | e: | f: | boot0 | boot1]
„
c: — Nonvolatile storage area containing boot partition 0 (primary).
„
d: — Nonvolatile storage area containing boot partition 1
(secondary).
„
e: — Primary partition of the flash card in the flash card slot.
„
f: — Secondary partition of the flash card in the flash card slot.
„
boot0 — Boot partition 0.
„
boot1 — Boot partition 1.