Set mac-user – 3Com Wireless LAN WX1200 User Manual
Page 248
248
C
HAPTER
8: AAA C
OMMANDS
set mac-user
Configures a user profile in the local database on the WX switch for a
user who can be authenticated by a MAC address, and optionally adds
the user to a MAC user group.
(To configure a MAC user profile in RADIUS, see the documentation for
your RADIUS server.)
Syntax —
set mac-user mac-addr [group group-name]
mac-addr
— MAC address of the user, in hexadecimal numbers
separated by colons (:). You can omit leading zeros.
group-name
— Name of an existing MAC user group.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Usage — MSS does not require MAC users to belong to user groups.
Users authenticated by MAC address can be authenticated only for
network access through the WX switch. MSS does not support passwords
for MAC users.
Examples — The following command creates a user profile for a user at
MAC address 01:02:03:04:05:06 and assigns the user to the eastcoasters
user group:
WX4400# set mac-user 01:02:03:04:05:06 group eastcoasters
success: change accepted.
See Also