Set security acl – 3Com Wireless LAN WX1200 User Manual

Page 459

Advertising
background image

set security acl

459

Examples — The following commands show the edit buffer before a
rollback, clear any changes in the edit buffer to security acl_122, and
show the edit buffer after the rollback:

WX4400# display security acl info all editbuffer
ACL edit-buffer information for all
set security acl ip acl_122 (ACEs 3, add 3, del 0, modified 0)
---------------------------------------------------------
1. permit IP source IP 20.0.1.11 0.0.0.255 destination IP any enable-hits
2. deny IP source IP 20.0.2.11 0.0.0.0 destination IP any
3. deny SRC source IP 192.168.1.234 255.255.255.255 enable-hits
WX4400# rollback security acl acl_122
WX4400# display security acl info all editbuffer
ACL edit-buffer information for all

See Also

„

display security acl on page 450

set security acl

In the edit buffer, creates a security access control list (ACL), adds one
access control entry (ACE) to a security ACL, and/or reorders ACEs in the
ACL. The ACEs in an ACL filter IP packets by source IP address, a Layer 4
protocol, or IP, ICMP, TCP, or UDP packet information.

By source address

Syntax

set

security

acl

ip

acl-name

{permit

[cos

cos]

|

deny}

source-ip-addr mask

[before

editbuffer-index

|

modify

editbuffer-index] [hits]

By Layer 4 protocol

Syntax

set

security

acl

ip

acl-name

{permit

[cos

cos] |

deny}

protocol-number

{source-ip-addr

mask

destination-ip-addr

mask}

[precedence precedence]

[tos tos] [before

editbuffer-index

|

modify

editbuffer-index] [hits]

By IP packets

Syntax

set

security

acl

ip

acl-name

{permit

[cos

cos]

|

deny}

ip

{source-ip-addr

mask

destination-ip-addr

mask} [precedence

precedence] [tos

tos] [before

editbuffer-index

|

modify

editbuffer-index] [hits]

Advertising