Display version – 3Com Wireless LAN WX1200 User Manual
Page 576
576
C
HAPTER
20: F
ILE
M
ANAGEMENT
C
OMMANDS
Examples — The following command shows configuration information
for VLANs:
WX4400# display config area vlan
# Configuration nvgen'd at 2004-5-21 19:36:48
# Image 3.0.0
# Model WX4400
# Last change occurred at 2004-5-21 18:20:50
set vlan 1 port 1
See Also
display version
Displays software and hardware version information for an WX switch
and, optionally, for any attached MAP access points.
Syntax —
display version [details]
details
— Includes additional software build information and
information about the MAP access points configured on the WX
switch.
Defaults — None
Access — All.
History —Introduced in MSS Version 3.0.
Examples — The following command displays version information for a
WX switch:
WX1200# display version
Mobility System Software, Version: 4.1.0 QA 67
Copyright (c) 2002, 2003, 2004, 2005 3Com Corporation. All rights
reserved.
Build Information: (build#67) TOP 2005-07-21 04:41:00
Model: WX
Hardware
Mainboard: version 24 ; revision 3 ; FPGA version 24
PoE board: version 1 ; FPGA version 6
Serial number 0321300013