Set spantree portfast – 3Com Wireless LAN WX1200 User Manual

Page 415

Advertising
background image

set spantree portfast

415

Access — Enabled.

History —Introduced in MSS Version 3.0.

Usage — This command applies only to the default VLAN (VLAN 1). To
change the cost of a port in another VLAN, use the set spantree
portvlancost
command.

Examples — The following command changes the cost on ports 3 and 4
to 20:

WX1200# set spantree portcost 3,4 cost 20
success: change accepted.

See Also

„

clear spantree portcost on page 394

„

clear spantree portvlancost on page 395

„

display spantree on page 398

„

display spantree portvlancost on page 403

„

set spantree portvlancost on page 417

set spantree
portfast

Enables or disables STP port fast convergence on one or more ports on a
wireless LAN switch.

Syntax

set

spantree

portfast

port

port-list

{enable

|

disable}

„

port

port-list

List of ports. MSS enables the feature on the

specified ports.

„

enable

— Enables port fast convergence.

„

disable

— Disables port fast convergence.

Defaults — STP port fast convergence is disabled by default.

Access — Enabled.

History —Introduced in MSS Version 3.0.

Usage — Use port fast convergence on ports that are directly connected
to servers, hosts, or other MAC stations.

Advertising