3Com Wireless LAN WX1200 - Manual (Page 146)

146 C HAPTER 7: IP S ERVICES C OMMANDS
See Also
„
clear ip telnet on page 131
„
display ip telnet on page 148
„
set ip https server on page 167
„
set ip telnet on page 171
„
set ip telnet server on page 172
display ip route Shows the IP route table.
Syntax — display ip route [destination]
„
destination — Route destination IP address, in dotted decimal
notation.
Defaults — None.
Access — All.
History —Introduced in MSS Version 3.0.
Table 36 Output for display ip https
Field Description
HTTPS is
enabled/disabled State of the HTTPS server:
„
Enabled
„
Disabled
HTTPS is set to use port TCP port number on which the WX switch listens for
HTTPS connections.
Last 10 connections List of the last 10 devices to establish connections to
the WX switch’s HTTPS server.
IP Address IP address of the device that established the
connection.
If a browser connects to a WX switch from behind a
proxy, then only the proxy IP address is shown. If
multiple browsers connect using the same proxy, the
proxy address appears only once in the output.
Last Connected Time when the WX switch established the HTTPS
connection to the WX switch.
Time Ago (s) Number of seconds since the device established the
HTTPS connection to the WX switch.