3Com Wireless LAN WX1200 - Manual (Page 194)

194 C HAPTER 7: IP S ERVICES C OMMANDS
Examples — The following command sets the date to March 13, 2003
and time to 11:11:12:
WX4400# set timedate date feb 29 2004 time 23:58:00
Time now is: Sun Feb 29 2004, 23:58:02 PST
See Also
„
clear summertime on page 135
„
clear timezone on page 136
„
display summertime on page 154
„
display timedate on page 155
„
display timezone on page 155
„
set summertime on page 191
„
set timezone on page 194
set timezone Sets the number of hours, and optionally the number of minutes, that the
wireless LAN switch’s real-time clock is offset from Coordinated Universal
Time (UTC). These values are also used by Network Time Protocol (NTP), if
it is enabled.
Syntax — set timezone zone-name { -hours [ minutes ]}
„
zone-name — Time zone name of up to 32 alphabetic characters. You
can use a standard name or any name you like.
„
- (minus sign) — Minus time to indicate hours (and minutes) to be
subtracted from UTC. Otherwise, hours and minutes are added by
default.
„
hours — Number of hours to add or subtract from UTC.
„
minutes — Number of minutes to add or subtract from UTC.
Defaults — If this command is not used, then the default time zone is
UTC.
Access — Enabled.
History —Introduced in MSS Version 3.0.