Set radio-profile max-rx-lifetime – 3Com Wireless LAN WX1200 User Manual
Page 360
360
C
HAPTER
11: M
ANAGED
A
CCESS
P
OINT
C
OMMANDS
set radio-profile
max-rx-lifetime
Changes the maximum receive threshold for the MAP radios in a radio
profile. The maximum receive threshold specifies the number of
milliseconds that a frame received by a radio can remain in buffer
memory.
Syntax —
set radio-profile name max-rx-lifetime time
name
— Radio profile name.
time
— Number of milliseconds. You can enter a value from 500
(0.5 second) through 250,000 (250 seconds).
Defaults — The default maximum receive threshold for MAP radios is
2000 ms (2 seconds).
Access — Enabled.
History —Introduced in MSS Version 3.0.
Usage — You must disable all radios that are using a radio profile before
you can change parameters in the profile. Use the set radio-profile
mode command.
Examples — The following command changes the maximum receive
threshold for radio profile rp1 to 4000 ms:
WX4400# set radio-profile rp1 max-rx-lifetime 4000
success: change accepted.
See Also
set radio-profile mode on page 362
set radio-profile max-tx-lifetime on page 361