Clientroamingtraps— generated when a client roams – 3Com Wireless LAN WX1200 User Manual

Page 178

Advertising
background image

178

C

HAPTER

7: IP S

ERVICES

C

OMMANDS

„

AutoTuneRadioPowerChangeTraps—Generated when the
RF Auto-Tuning feature changes the power setting on a radio.

„

ClientAssociationFailureTraps—Generated when a client’s
attempt to associate with a radio fails.

„

ClientAuthorizationSuccessTraps—Generated when a client is
successfully authorized.

„

ClientAuthenticationFailureTraps—Generated when
authentication fails for a client.

„

ClientAuthorizationFailureTraps—Generated when
authorization fails for a client.

„

ClientClearedTraps—Generated when a client’s session is
cleared.

„

ClientDeAssociationTraps—Generated when a client is
dissociated from a radio.

„

ClientDot1xFailureTraps—Generated when a client experiences
an 802.1X failure.

„

ClientRoamingTraps—Generated when a client roams.

„

CounterMeasureStartTraps—Generated when MSS begins
countermeasures against a rogue access point.

„

CounterMeasureStopTraps—Generated when MSS stops
countermeasures against a rogue access point.

„

DAPConnectWarningTraps—Generated when a Distributed
MAP whose fingerprint has not been configured in MSS establishes
a management session with the switch.

„

DeviceFailTraps—Generated when an event with an Alert
severity occurs.

„

DeviceOkayTraps—Generated when a device returns to its
normal state.

„

LinkDownTraps—Generated when the link is lost on a port.

„

LinkUpTraps—Generated when the link is detected on a port.

„

MichaelMICFailureTraps—Generated when two Michael
message integrity code (MIC) failures occur within 60 seconds,
triggering Wi-Fi Protected Access (WPA) countermeasures.

Advertising