3Com Wireless LAN WX1200 User Manual
Page 562
562
C
HAPTER
19: RF D
ETECTION
C
OMMANDS
Defaults — The permitted vendor list is empty by default and all vendors
are allowed. However, after you add an entry to the list, MSS allows only
the devices whose OUIs are on the list.
Access — Enabled.
History —Introduced in MSS Version 4.0.
Usage — The permitted vendor list applies only to the WX switch on
which the list is configured. WX switches do not share permitted vendor
lists.
If you add a device that MSS has classified as a rogue to the permitted
vendor list, but not to the ignore list, MSS can still classify the device as a
rogue. Adding an entry to the permitted vendor list merely indicates that
the device is from an allowed vendor. However, to cause MSS to stop
classifying the device as a rogue, you must add the device’s MAC address
to the ignore list.
Examples — The following command adds an entry for clients whose
MAC addresses start with aa:bb:cc:
WX1200# set rfdetect vendor-list client aa:bb:cc:00:00:00
success: MAC aa:bb:cc:00:00:00 is now in client vendor-list.
The trailing 00:00:00 value is required.
See Also
clear rfdetect vendor-list on page 537