HP XP Racks - Manual (Page 149)

Figure 82 (page 149) shows the process flow for defining a 2DC configuration without a host at
the secondary site. The step numbers indicated in Figure 82 (page 149) corresponds to the procedures
in “Definition procedure (2DC configuration)” (page 149) .
Figure 82 Process Flow for Defining a 2DC Configuration without a Host at the Secondary Site
#1 This procedure is not required if the path has been established by using Remote Web Console.
#2 A logical path must be built for the reverse direction if you are:
•
Using Continuous Access Journal Z
•
Using the Reverse Resync Function
Definition procedure (2DC configuration)
This section explains how to define a 2DC configuration with a host at the secondary site by using
the Remote DKC Control Function.
First, set the items that need to be set by using Remote Web Console from among the items listed
in
Table 35 (page 145)
The following is the legend used for the figures represented in the procedures
Defining a 2DC configuration 149