HP Onboard Administrator User Manual
Page 102
Configuring the HP BladeSystem c7000 enclosure and enclosure devices 102
NOTE:
The Alert Sender Domain might not be needed. This field depends on the mail server
setup.
Field
Possible value
Description
E-Mail address
<account>@<domain>
A valid email address for the administrator
or other designated individual receiving the
alert mail
SMTP Server
•
IPv4 address—###.###.###.###
where ### ranges from 0 to 255
•
IPv6
address—####:####:####:####:##
##:####:####:#### where ####
ranges from 0 to FFFF. A compressed
version of the same IPv6 address is also
supported.
•
DNS name—1 to 64 characters
including all alphanumeric characters
and the dash (-)
An IPv4 address, IPv6 address, or the DNS
name for the SMTP server
Alert Sender Name A character string including all
alphanumeric characters, the dash (-), the
underscore (_), and space. The field is
optional with a limit of 40 characters.
Onboard Administrator name
Alert Sender
Domain
A character string including all
alphanumeric characters, the dash (-), and
the period (.)
The domain in which the Onboard
Administrator resides. Mutually exclusive
with Sender Email.
Alert Sender E-mail <account>@<domain>
Sender's valid email address for the
administrator or other designated individual
receiving the alert mail.
1.
Select the Enable AlertMail checkbox to enable the AlertMail feature.
2.
Enter values for the e-mail address, alert sender domain, and SMTP server.
3.
Click Apply to save settings.
AlertMail, if enabled, sends alerts by e-mail for the following events:
o
Enclosure status change
o
Enclosure information change
o
Fan status change
o
Fan inserted
o
Fan removed
o
Power supply status
o
Power supply inserted
o
Power supply removed
o
Power supply overload
o
Blade inserted
o
Blade removed
o
Blade status
o
Blade thermal condition