HP Onboard Administrator - Manual (Page 216)

Configuring the HP BladeSystem c7000 enclosure and enclosure devices 216
HP ProLiant BL680c G7 Servers
Device bay port mapping table for c3000 enclosure
If a device is not present, the check box is disabled and the port cannot be viewed.
The server blades are mapped to the interconnect bays in the following manner. The terms 1x/2x or 4x refer
to the number of interconnect lanes per port provided by the mezzanine card.
Half-height server blade
The following table lists the available configurations for half-height devices installed in device bay N (1-8).
Connection Port number Connects to
interconnect bay/port Comments
Embedded NIC NIC 1 (Port:1)
NIC 2 (Port:2)
1/Port N
1/Port N+8
One single-wide Ethernet
interconnect module
Mezzanine slot 1—1x or
2x cards (4x cards are not
supported in this slot)
1x/2x port 1
1x/2x port 2
2/Port N
2/Port N+8
• One single-wide
interconnect module
• Only two ports will be
connected.
• Four port cards will only
connect the first two ports.
Mezzanine slot 2—1x or
2x cards 1x/2x port 1
1x/2x port 2
1x/2x port 3
1x/2x port 4
3/Port N
4/Port N
3/Port N+8
4/Port N+8
One or two single-wide
interconnect modules
Mezzanine slot 2—4x 4x port 1 3/Port N One double-wide