HP Onboard Administrator - Manual (Page 92)

Rack View 92
The Rack Topology tab displays all linked enclosures, which have one of the following states:
• Linked—Not Signed In. Enter a user name and password in the text boxes, and click Sign In. A
graphical view of the enclosure appears.
• Linked—Not Signed In with a card reader icon. This state indicates the linked enclosure is Two-Factor
Authentication enabled but is not authenticated. This state occurs under two conditions:
o The configuration is not supported. You must enable the primary enclosure for Two-Factor
Authentication, and both the primary and linked enclosure must have the same credentials in order
for the linked enclosure to authenticate using Two-Factor Authentication.
o If you click the Sign Out link on a Two-Factor Authenticated enclosure that is already authenticated,
this state displays. To reauthenticate this enclosure, you must refresh the GUI or reauthenticate the
primary enclosure.
• Linked—Signed In with the Load Enclosure Information button. Click Load Enclosure Information to
display the graphical view of the enclosure.
• Linked—Signed In with a graphical view of the enclosure displayed.
On the right side of the linked enclosure name bar, click Sign Out to sign out of a linked enclosure.
Rack Power and Thermal tab
The Power and Thermal tab displays information about the temperature inside the enclosure as well as the
thermal and power subsystem health status. A graphical view of the present power and power limit helps you
determine power status.
Rack cooling requirements