Interconnect bay information tab – HP Onboard Administrator User Manual

Page 242

Advertising
background image

Configuring the HP BladeSystem c7000 enclosure and enclosure devices 242

Row

Description

I/O Configuration

Interconnect bay configuration is incorrect. Possible values are OK or I/O mismatch.

Power Allocation
Request

There is insufficient power to adequately power the interconnect. Possible values are
OK or Insufficient enclosure power.

Device Operational

Device has failed; status was not requested by the Onboard Administrator. Possible

values are OK or Error.

Device Degraded

Device has failed; status was requested by the Onboard Administrator. Possible values
are OK or Error.

Device Informational

The device is operating normally but requires attention.

Duplicate IP Address

A check to verify if a duplicate IP address exists on the network during assignment.

Possible values are OK or an informational message indicating there is a duplicate IP

address on the network.

Interconnect Bay Information tab

Hardware Information

Row

Description

Product Name

The common descriptive name of the interconnect device.

Management IP
Address

IP address of the interconnect management interface.

Management URL

Address where the interconnect device can be managed and configured for use in the
network.

User Assigned Name

A name assigned to the interconnect by the user. If supported, the name is assigned

using the interconnect Management Interface.

Part Number

The part number to be used when ordering an additional interconnect device of this
type.

Spare Part Number

The part number to be used when ordering a replacement interconnect device of this

type.

Serial Number

The unique serial number of the interconnect device.

Type

The interface type of the interconnect device. Possible values are Ethernet or fiber.

Manufacturer

The name of the company that manufactured the interconnect device.

Temperature Sensor

Indicates whether or not the interconnect device has a temperature sensor.

Firmware Version

The firmware version of the interconnect module.

VLAN ID (Name)

The VLAN ID number and name assigned to the interconnect bay.

IPv6 Information

Row

Description

Link Local Address

The link local IPv6 address of the interconnect interface.

EBIPA Address

The EBIPA IPv6 address of the interconnect interface.

DHCPv6 Address

The DHCP IPv6 address of the interconnect interface.

Advertising