Viewing the status screens – HP Onboard Administrator User Manual
Page 96
Configuring the HP BladeSystem c7000 enclosure and enclosure devices 96
Configuring the HP BladeSystem c7000 enclosure
and enclosure devices
Viewing the status screens
Each enclosure can be selected from the left navigation tree. Clicking the enclosure name opens the main
status page for the enclosure.
On this page, four tabs are available at the top of the main page: Status, Information, Virtual Buttons, and
Component Firmware.
The Status tab displays one of the following values as the overall Enclosure Status:
•
Critical/Failed
•
Major
•
Minor/Degraded
•
Normal/OK
•
Unknown
•
Informational
The Active HP BladeSystem Onboard Administrator Status and Standby HP BladeSystem Onboard
Administrator Status are similar to the Enclosure Status and display a status for the Onboard Administrator.
If a standby Onboard Administrator is not present in the system, its status value is Absent.
Power Mode displays the current power mode of the enclosure. The following values are possible:
•
AC Redundant
•
Power Supply Redundant
•
Not Redundant
The Enclosure Status Overview is divided into four sections:
•
Device Bay Overview
•
Interconnect Bay Overview
•
Power Subsystem
•
Thermal Subsystem
For each of these sections, the following values are possible:
•
Critical/Failed
•
Major
•
Minor/Degraded
•
Normal/OK
•
Unknown