HP Onboard Administrator - Manual (Page 254)

Configuring the HP BladeSystem c7000 enclosure and enclosure devices 254
This value represents the minimum power readings from the enclosure over the last 24-hour period. If the
enclosure has not been running for 24 hours, then the value is the minimum of all the readings since the
enclosure was powered up.
Refresh Page
When you restart an enclosure, HP recommends waiting five minutes and then click Refresh Page, because
the Power Meter does not dynamically update.
Table View tab
This screen enables you to view the power readings for the enclosure in a table format.
Enclosure Power Summary
Row Description
Samples Number of samples taken.
Average (Watts,
Btu/hr, or Amps)
This value shows the average of the power readings (Watts, Btu/hr, or Amps
depending on what you have selected) from the enclosure over the last 24 hour period.
If the enclosure has not been running for 24 hours, the value is the average of all the
readings since the enclosure was powered up.