Running the insight display installation – HP Onboard Administrator User Manual
Page 32
HP BladeSystem Insight Display 32
2.
Pull the Insight Display out of the chassis to lock it into place, and then tilt it up.
Running the Insight Display installation
To identify the enclosure, the rear enclosure UID light and the background of the Insight Display are
illuminated blue when the enclosure is powered on initially. When the enclosure is powered up for the first
time, the Insight Display launches an installation wizard to guide you through the configuration process. At
the beginning of the installation, the wizard automatically powers on the enclosure UID. After the installation
is complete, the wizard powers off the enclosure. After configuring the enclosure, the Insight Display verifies
that there are no installation or configuration errors. If errors are present, the Insight Display guides you
through the process of correcting the errors.
The Enclosure Settings screen (on page
, on page
) is the first screen to appear.
1.
Review each setting on the Enclosure Settings screen (on page
, on page
) for accuracy.
2.
To change any value, move the cursor to the menu option to be edited and press the OK button.
3.
Change the setting to the appropriate value, move the cursor to Accept, and press OK to return to the
Enclosure Settings menu. Repeat this step until all options on the Enclosure Settings menu are accurate.