HP Onboard Administrator - Manual (Page 197)

Configuring the HP BladeSystem c7000 enclosure and enclosure devices 197
Field Possible values Description
Surname Must be 0 to 60 characters
in length.
The surname of the person responsible for the Onboard
Administrator.
Given Name Must be 0 to 60 characters
in length. The given name of the person responsible for the
Onboard Administrator.
Initials Must be 0 to 20 characters
in length.
The initials of the person responsible for the Onboard
Administrator.
DN Qualifier Must be 0 to 60 characters
in length. Acceptable
characters are all
alphanumeric, the space,
and the following
punctuation marks: ' ( ) + , -
. / : = ?
The distinguished name qualifier of the Onboard
Administrator.
Certificate-signing request attributes
Field Possible values Description
Challenge Password Must be 0 to 30 characters
in length The password for the certificate-signing request
Confirm Password Must be 0 to 30 characters
in length
Confirm the Challenge Password
Unstructured Name Must be 0 to 60 characters
in length
This is for additional information (for example, an
unstructured name that is assigned to the Onboard
Administrator)
Click Apply to generate a self-signed certificate or a standardized certificate-signing request.
Standardized certificate-signing request
This screen displays a standardized certificate signing request generated by the Onboard Administrator. The
content of the request in the text box may be sent to a certificate authority of your choice for signing. Once
signed and returned from the certificate authority, the certificate can be uploaded under the "Certificate
Upload" tab.
If a static IP address is configured for Onboard Administrator when this certificate request is generated, the
certificate request will be issued to the static IP address. Otherwise, it is issued to the dynamic DNS name of
the Onboard Administrator. The certificate, by default, requests a valid duration of 10 years (this value is
currently not configurable).
When submitting the request to the certificate authority, be sure to:
1. Use the Onboard Administrator URL for the server.
2. Request the certificate be generated in the RAW format.
3. Include the Begin and End certificate lines.
Standby Certificate Upload tab
There are two methods for uploading certificates for use in HP BladeSystem Onboard Administrator:
• Paste certificate contents into the text field and click Upload.
• Paste the URL of the certificate into the URL field and click Apply.
The certificate to be uploaded must be from a certificate request sent out and signed by a certificate authority
for this particular Onboard Administrator. Otherwise, the certificate fails to match the private keys used to