HP Onboard Administrator - Manual (Page 193)

Configuring the HP BladeSystem c7000 enclosure and enclosure devices 193
TCP/IP Settings for Standby OA
This screen, as seen from the Active Onboard Administrator GUI, displays the current enclosure TCP/IP
settings for the standby Onboard Administrator.
For information about the TCP/IP settings that appear on this screen, see the Active Onboard Administrator
TCP/IP Settings ("
Active Onboard Administrator TCP/IP Settings screen " on page 177 ) screen.
To modify the TCP/IP settings, select Click here. For information about the TCP/IP settings that you can
modify, see the Enclosure TCP/IP Settings (on page 108 ) screen.
The TCP/IP Settings screen seen from the Standby Onboard Administrator GUI displays the same
information. You can modify IPv4 settings in this screen, but IPv6 settings must be changed from the Active
Onboard Administrator.