Language pack tab – HP Onboard Administrator User Manual
Page 186
Configuring the HP BladeSystem c7000 enclosure and enclosure devices 186
If two enclosures are attached, the firmware update process flashes the standby Onboard Administrator first
and then flashes the primary Onboard Administrator. If you are unable to connect immediately following a
firmware update, wait 30 seconds for the enclosure to become available on the network.
Enclosure Firmware Management
Update the Onboard Administrator from an image on a firmware ISO. Enclosure Firmware Management
must be enabled, and a valid URL must be specified in the Enclosure Firmware Management settings. For
more information, see "Enclosure Firmware Management (on page
)."
To the firmware version in this field, click Apply to update the Onboard Administrator.
Installing a previous version
To install a previous version of the firmware, select the Force downgrade box from the Firmware Information
section of the screen. Select the firmware file by browsing locally or by locating a URL using the input boxes.
If you downgrade Onboard Administrator firmware to 2.31 or lower, you will lose any Directory groups
beyond the first five groups. Onboard Administrator versions higher than 2.31 support 30 groups, while
earlier versions only support five groups. After the first five groups, you will lock out additional directory
users.
When trying to downgrade to a previous version with IPv6 enabled, VC will require an Onboard
Administrator minimum firmware version. To proceed with the downgrade, disable IPv6 and try again.
To obtain the latest firmware for your Onboard Administrator see the HP BladeSystem Updates website
Language Pack tab
A list of installed language packs appears in this screen. The English language is embedded and cannot be
removed. Only one additional language can be added using a language pack. Adding a new language
pack automatically removes an existing language pack. To remove an existing language pack, select the
check box and click Remove.
To add a language pack, you have two options: