HP Onboard Administrator - Manual (Page 106)

Configuring the HP BladeSystem c7000 enclosure and enclosure devices 106
Device Power Sequence Interconnect Bays tab
Column Description
Bay Bay number of the device
Device The type of device in the bay or Absent if no device is installed in the bay
Enabled
Enables power sequencing, disables power sequencing, or does not allow powering
on of the device if No Poweron is selected.
Delay The amount of delay, in seconds, before the device powers on. Possible delay values
are 1 to 3600.
Click Apply to save settings.
Date and Time
Static date and time settings
The date and time are static and not updated in real-time. The date and time can only be set if NTP is
disabled.
Field Possible value Description
Date yyyy-mm-dd
• mm is an integer from 1 to 12
• dd is an integer from 1 to 31
The date assigned to the enclosure
Time hh:mm:ss (24-hour time, ss is
optional)
• hh is an integer from 0 to 23
• mm is an integer from 0 to 59
The time assigned to the enclosure
Time Zone Time zone settings
• Africa time zone settings (on
page 331 )
• Americas time zone settings
(on page 332 )
• Asia time zone settings (on
page
333 )
• Universal time zone settings
(on page 331 )
• Oceanic time zone settings (on
page 334 )
• Europe time zone settings (on
page 335 )
• Polar time zone settings (on
page 335 )
The time zone assigned to the enclosure
NTP Settings
To enable this feature, select Set time using an NTP server.