HP Onboard Administrator - Manual (Page 27)

HP BladeSystem c7000 Enclosure hardware installation 27
2. Slide the Onboard Administrator module into the Onboard Administrator tray, and close the handle.
When the Onboard Administrator module is fully inserted, it locks into place.
HP BladeSystem Onboard Administrator cabling
Item Connector Description
1
Enclosure
link-down port Connects to the enclosure link-up port on the enclosure beneath it using a CAT5 patch
cable.
2 Enclosure link-up
port and service
port
Connects to the enclosure link-down port on the enclosure above it using CAT5 patch
cable. On a stand-alone enclosure or the top enclosure in a series of linked
enclosures, the top enclosure link-up port may function as a service port.
3 OA1/iLO Onboard Administrator Ethernet connection. Use a CAT5 patch cable to connect to
the management network. Connect to this port to remotely communicate with the
Onboard Administrator, all iLO ports on each server blade, and supporting
interconnect module management parts.