HP Onboard Administrator - Manual (Page 224)

Configuring the HP BladeSystem c7000 enclosure and enclosure devices 224
Connection Port Number Connects to interconnect bay/port
A-Side Mezzanine 2 Port 1
Port 2
Port 3
Port 4
5/Port N
6/Port N
7/Port N
8/Port N
A-Side Mezzanine 3 Port 1
Port 2
Port 3
Port 4
7/Port N+8
8/Port N+8
5/Port N+8
6/Port N+8
B-Side Mezzanine 4 Port 1
Port 2
Port 3
Port 4
7/Port N-1
8/Port N-1
5/Port N-1
6/Port N-1
B-Side Mezzanine 5 Port 1
Port 2
Port 3
Port 4
3/Port N+7
4/Port N+7
3/Port N-1
4/Port N-1
B-Side Mezzanine 6
NIC only Port 1
Port 2 1/Port N-1
2/Port N-1
B-Side Mezzanine 7 Port 1
Port 2
Port 3
Port 4
5/Port N+7
6/Port N+7
7/Port N+7
8/Port N+7
Firmware
To view firmware information for the device bay components and perform a manual discovery and manual
update of firmware, click Firmware. For information about support requirements and performance issues, see
"Enclosure Firmware Management (on page 167 )."
Firmware summary information
Row Description
Bay The device bay within the enclosure.
Device Model The model number of the device.
Firmware Component The component for which the firmware information is provided.
Current Version The version of the firmware installed on the component.
Firmware ISO Version The latest version of firmware available for installation on the component.
NOTE: If the blade firmware does not match the DVD ISO firmware after a server is discovered
or updated, an informational icon is displayed.
NOTE: A letter included after the firmware version indicates a smart component release note
revision. This revision is not a functional firmware update.
Manual discovery