HP Onboard Administrator - Manual (Page 309)

Troubleshooting 309
222 The Active and Standby Onboard Administrator are not the same hardware build.
223 The firmware installed on an Onboard Administrator module is incompatible with FirmwareSync.
224 Failed to create firmware image
225 The Active and Standby Onboard Administrator have the same firmware version installed.
226 Upgrade an Onboard Administrator to firmware 2.10 or later to enable this feature.
227 The requested user cannot be removed from iLO because it is the only remaining administrator account.
228 The requested user cannot be added to iLO because iLO local accounts have been disabled.
229 The requested user cannot be added to iLO because the maximum number of local accounts already
exists.
230 One or more of the specified SNMP traps were not already configured on the Onboard Administrator
and cannot be removed.
231 Reset Factory Defaults in progress. Login disabled.
232 The requested operation is not available on c3000 enclosures.
233 This feature requires the iLO Select Pack License or iLO Advanced Pack License on the server blade when
LDAP is enabled on the Onboard Administrator.
234 Invalid characters detected.
235 HP Onboard Administrator is initializing. Login disabled.
236 Cannot retrieve Onboard Administrator media device array.
237 The requested device is not ready.
238 Power off or remove the partner blade.
239 The current firmware does not support this operation.
240 Serial number update requires newer firmware version.
241 The requested device is not present or no firmware upgrade is required.
242 The operation cannot be performed on the requested device.
243 iLO license information cannot be retrieved because iLO XML Reply is disabled.
244 SSH is disabled on this blade.
245 Disconnect the virtual media applet.
246 Invalid SNMP Write Community string
247 Invalid SNMP Read Community string
248 Invalid port number. The LDAP server SSL port can be any number between 1 and 65535.
249 Feb 29 was specified but the year is not a leap year.
250 The CA certificate is invalid.
251 Exceeded the maximum number of CA certificates.
252 No CA certificates are imported.
253 This CA certificate is already imported.
254 A certificate is already mapped to this user.