HP Onboard Administrator - Manual (Page 200)

Configuring the HP BladeSystem c7000 enclosure and enclosure devices 200
box to select all servers for the discovery. By default, all device bays and the Discover All Servers check box
are selected.
To start the discovery process on the selected servers, click Start Manual Discovery.
A manual update of one or more servers to the designated firmware image versions can be initiated. To
initiate a firmware update on one or more servers, select Manual Update.
After initiating a manual firmware update the Manual Update Device Bay Selection screen appears. Select
one or more device bays on which to perform the update, or select the Update All Servers check box to select
all servers for the update. By default, all device bays and the Discover All Servers check box are selected.
To start the update process on the selected servers, click Start Manual Update.
Device Bay Status tab
Selecting a specific blade within the enclosure opens the Device Bay Information, the Bay xx page, where xx
is the bay selected. This screen provides tabs for Status, Information, Virtual Devices, Boot Options, and IML
Log.
The Server Management section of the page contains links to aid the management of the server blade in the
device bay.