HP Onboard Administrator - Manual (Page 203)

Configuring the HP BladeSystem c7000 enclosure and enclosure devices 203
Row Description
Power Denial-Power
Delay
A warning that device power delayed until the configured Power Delay for this bay has
elapsed.
Power Denial-Firmware
Management A warning that device power delayed until Firmware Management process completes.
Power Denial-I/O
Discovery
A warning that device power delayed until interconnect discovery is complete.
Power Denial-Settings A warning that device power delayed until device settings are updated.
Power Denial-Partner
Discovery
A warning that device power delayed until potential partner devices are discovered.
Power Denial-I/O
Ready A warning that device power delayed until corresponding interconnect is ready.
Power Denial-I/O
Missing A warning that device power delayed until corresponding interconnect is inserted into
enclosure.
Power Denial-SAS
Mezz A warning that device power delayed until SAS Mezz discovery is complete.
Power Denial-Blade Link
Discovery A warning that device power delayed during MMP Blade Link device discovery.
Temperature sensors information
Column Description
Sensor The sensor number
Location Location of sensor in the device
Status This is the status of the temperature sensor. The status matches the graphic presentation
of the temperature.
Temperature Graphic presentation of temperature
iLO
The iLO for the server blade in the device bay is available by clicking iLO. The Onboard Administrator iLO
page appears, as described in the Device Bay "iLO screen (on page
210 )" section.
The Device Bay iLO screen provides links to several different iLO interfaces. When you click on any of these
links, the Onboard Administrator provides a one-time login (login bypass) to ProLiant iLO management
processors. The iLO access levels are mapped by the Onboard Administrator privilege level (user must have
access to the bay):
• Onboard Administrator Administrator—Administer User Accounts, Remote Console Access, Virtual
Power and Reset, Virtual Media, Configure iLO settings.
• Onboard Administrator Operator—Remote Console Access, Virtual Power and Reset, Virtual Media.
When an Onboard Administrator user launches the iLO web interface or an iLO remote console, a temporary
iLO user is created . The Onboard Administrator can create up to three temporary accounts for each iLO. If
three or more temporary Onboard Administrator accounts are already on an iLO, then the Onboard
Administrator deletes the oldest temporary users in iLO user databases.
Port Mapping Information
Port mapping information is available by clicking Port Mapping Information.