HP Onboard Administrator - Manual (Page 46)

HP BladeSystem Insight Display 46
• Restore Configuration—Select this option to upload an enclosure configuration file with .CFG
extension.
The Restore OA Configuration menu lists all the files on the attached USB key with .CFG file extensions.
Select the desired configuration file and press OK to apply that configuration to the enclosure.
Because the configuration file can modify settings like the Onboard Administrator IP address, be sure to
only apply the same file to multiple enclosures if the settings are generic, such as SNMP or LDAP server
addresses. Do not apply the same file to multiple enclosures if it contains Onboard Administrator IP
address configuration commands or EBIPA IP address commands.
• Save Configuration—Select this option to save the enclosure configuration to a file on the USB key.
KVM Menu screen
If the Enclosure KVM feature is supported, the Insight Display Main Menu displays the KVM Menu button.
Select this button to deactivate the Insight Display and activate the VGA connector on the KVM module. Only
one of the two interfaces can be active at a time. For more information, see "Enclosure KVM (on page 49 )."
Insight Display errors
The enclosure installation is successful when all errors are corrected. The errors in the following sections are
specific to installation and initial configuration of the enclosure. To clear errors that occur after initial
powerup and configuration, see the HP BladeSystem Onboard Administrator User Guide for information.
The following types of errors can occur when installing and configuring the enclosure:
• Power errors
• Cooling errors
• Location errors
• Configuration errors
• Device failure errors
When the enclosure UID LED is off, the Insight Display is illuminated amber when any error condition exists.
The navigation bar displays the following selections when an error condition exists:
• Health summary icon—Displays the Health Summary screen.