HP Onboard Administrator - Manual (Page 243)

Configuring the HP BladeSystem c7000 enclosure and enclosure devices 243
Row Description
SLAAC Address The SLAAC IPv6 address of the interconnect interface.
Link Local Management
URL
The link local IPv6 management URL where the interconnect device can be managed
and configured for use in the network.
EBIPA Management
URL The EBIPA IPv6 management URL where the interconnect device can be managed and
configured for use in the network.
DHCPv6 Management
URL
The DHCP IPv6 management URL where the interconnect device can be managed and
configured for use in the network.
SLAAC Management
URL
The SLAAC IPv6 management URL where the interconnect device can be managed and
configured for use in the network.
Connectivity Information
Row Description
JS2 Connector This field displays the presence or absence of the JS2 connector.
Internal Ethernet
Interface to OA This field displays the presence or absence of an internal Ethernet interface to the
Onboard Administrator.
Internal Ethernet Route
to OA
This field displays the status of an internal Ethernet route to the Onboard Administrator.
Possible values are Enabled or Disabled.
Internal Serial Interface
to OA This field displays the presence or absence of an internal serial interface to the
Onboard Administrator.
Internal Serial Route to
OA
This field displays the status of an internal serial route to the Onboard Administrator.
Possible values are Enabled or Disabled.
Serial Port Baud Rate This field displays the serial port baud rate.
External Serial Port
Interface
This field displays the presence or absence of an external serial port interface.
External Ethernet
Interface This field displays the presence or absence of an external Ethernet interface.
Interconnect Bay Virtual Buttons
Interconnect bay virtual buttons enable you to cycle power, reset, or toggle the UID on the device of your
choice from the Onboard Administrator GUI.
Button Description
Power Off Clicking this button shuts the power off on the interconnect device