HP Onboard Administrator - Manual (Page 283)

Configuring the HP BladeSystem c7000 enclosure and enclosure devices 283
Checkbox Description
Selected Interconnect Bays Gives the user permissions for only the selected interconnect bays.
To save settings, click Add Group.
Edit an LDAP Group
Group information
Field Possible value Description
Group Name 1 to 255 characters; all
characters except quotation
marks ("). The first character of
the group name must be an
alpha character.
The group name is used to determine LDAP
users' group membership. The group name must
match one of the following five properties of a
directory group: the name, distinguished name,
common name, Display Name, or SAM
Account Name. The distinguished name is
recommended to uniquely specify the LDAP
group. If the Onboard Administrator is
configured to search the GC port and a
distinguished name is not used, then an
incorrect match in multiple domains may occur
which could result in unintended authorization.
Description 0 to 58 characters, including
all alphanumeric characters,
the dash (-), the underscore (_),
and the space
Can contain a more readable version of the
group name, as well as other useful information
Privilege level
Account classification Capabilities Account name /
Privilege level
Bays selected for this
account
Administrator • All commands
• Local account, not
LDAP
• Only account
remaining after a
reset Onboard
Administrator to
factory defaults
(account retains
configured
Administrator
password)
• Administrator
account password
can be reset to
factory default
through the Onboard
Administrator serial
port using L lost
password recovery
option
• Can download, add,
Administrator /
administrator All