Navigating the insight display – HP Onboard Administrator User Manual
Page 37
HP BladeSystem Insight Display 37
If no errors are detected, the rear enclosure UID powers off, and the Insight Display screen illuminates
green.
10.
To return to the Main Menu, press OK. Enclosure and blade hardware setup and configuration is
complete.
IMPORTANT:
If errors are detected, the Insight Display screen illuminates amber, and the Health
Summary screen displays. For more information on troubleshooting configuration errors, see
"Insight Display errors (on page
)."
All configuration errors prevent the operation of the enclosure and should be corrected
immediately.
11.
Open a browser and connect to the active Onboard Administrator module using the Onboard
Administrator IP address that was configured during the Insight Display installation wizard process.
12.
Enter the user name and password from the tag supplied with the Onboard Administrator module to
access the remote Onboard Administrator web interface and complete the Onboard Administrator first
time installation wizard.
Navigating the Insight Display
Navigate through the menus and selections by using the arrow buttons on the Insight Display panel.
The first menu seen is the Main Menu: