HP Onboard Administrator - Manual (Page 81)

First Time Setup Wizard 81
Mode Insight Display
name
Description
limit, the new device is prevented from powering on.
A Static Power Limit is better when:
• You do not want caps dynamically adjusted on your
blades.
• You prefer to not power on a server blade if it cannot be
allocated full power (even if it typically consumes less).
• More than 1/4 of the blades in the enclosure do not meet
hardware or firmware requirements for the Enclosure
Dynamic Power Cap.
None None The enclosure power usage is not managed or capped.
Finish
To view a current configuration for the enclosure:
1. Click the SHOW CONFIG link. The configuration opens in a new browser window.
2. To save the configuration as a text file, choose one of the following options:
o If you use Microsoft Internet Explorer, select Save As.
o If you use Mozilla Firefox, select Save Page As.
o If you use Google Chrome, select Save Link As.
For security, the retrieved current configuration does not contain any user passwords. You can manually edit
the script to add the user passwords after the user name on the ADD USER lines. Also, the retrieved current
configuration does not contain any of the LCD settings (Lock Buttons, Enable PIN Protection, and PIN Code).
These settings cannot be added from the configuration script.
To force the First Time Setup Wizard to run again the next time a user signs into the Onboard Administrator,
clear the Do not automatically start this wizard again check box.
To save and exit the First Time Setup Wizard, click Finish. The First Time Setup Wizard screen closes and you
are returned to the default main screen of HP BladeSystem Onboard Administrator.