HP Onboard Administrator - Manual (Page 311)

Troubleshooting 311
290 Request to enable DHCP addressing on the active Onboard Administrator is denied because Enclosure
IP Mode is enabled.
291 The value provided is not proper base64.
292 The firmware image provided is an older version than the current firmware. Onboard Administrator
settings cannot be preserved.
293 The file provided is not a valid Onboard Administrator firmware image.
294 There are no USB keys connected to the enclosure.
295 No valid firmware images found on USB key
296 No configuration scripts found on USB key
297 I/O error on USB key
298 Badly formatted USB file URL
299 Permission problems when accessing USB media
300 Error uploading to USB media
301 An invalid number of GUIDs was passed to the Onboard Administrator.
302 URL flash image for microcode download not available
303 Invalid session timeout
304 Invalid watts value
305 Failed to store change for power cap
306 Enclosure Dynamic Power Cap feature is not allowed.
307 Wrong number of bays specified for enclosure while setting capping bays to exclude.
308 The number of bays opted out exceeds the maximum allowed.
309 Enclosure Dynamic Power Cap feature is not allowed.
310 Enclosure Dynamic Power Cap is set.
311 Enclosure Dynamic Power Cap is not set. Cannot confirm that device tray meets minimum firmware
version required.
312 Enclosure Dynamic Power Cap not set. Device tray fails to meet the minimum required firmware version.
313 The requested cap is outside the allowable range of Enclosure Dynamic Power Cap values.
314 Server Power Reduction cannot currently be enabled. Enclosure Dynamic Power Cap is not allowed.
315 No valid ISO images found on USB key
316 Bay privileges cannot be revoked for Administrators with OA permission.
317 Invalid DNS hostname
318 Factory defaults cannot be restored because the enclosure is in VC mode.
319 The string entered is not a valid IPv6 address.
320 IPv6 static address already exists
321 IPv6 static address not found
322 Unable to add