HP Onboard Administrator - Manual (Page 218)

Configuring the HP BladeSystem c7000 enclosure and enclosure devices 218
HP ProLiant BL2x220c G7 Server
The following table lists the available configurations for ProLiant BL2x220c G7 devices installed in c3000
device bay N (1-8).
Connection Port Number Connects to interconnect bay/port
Server A Embedded NIC NIC 1 (Port:1)
NIC 2 (Port:2) 1/Port N
2/Port N
Server A NC543i* Port 1 3/Port N
Server B Embedded NIC NIC 1 (Port:1)
NIC 2 (Port:2)
1/Port N+8
2/Port N+8
Server B NC543i* Port 1 3/Port N+8
*The ProLiant BL2x220c G7 Server embedded NC543i is automatically configured by the Onboard Administrator to
Ethernet, if an Ethernet interconnect module is installed in bay 3, or to IB if a double-wide IB interconnect is installed in
bay 3. To change the NC543i configuration from one type to another, power off all the ProLiant BL2x220c G7 Servers,
and replace the interconnect module with the other type. Reboot the active Onboard Administrator or reseat all the
ProLiant BL2x220c G7 Servers and the Onboard Administrator reconfigures all the embedded NC543i for the new
interconnect type.
HP ProLiant BL680c G7 Server
The following table lists the port mapping for the ProLiant BL680c G7 server blades installed in c3000 device
bay N (2 or 4).
Connection Port Number Connects to interconnect bay/port
A-Side Embedded NIC NIC 1
NIC 2
NIC 3
NIC 4
1/Port N+4
1/Port N+12
1/Port N
1 Port N+8
B-Side Embedded NIC NIC 5
NIC 6 1/Port N+3
2/Port N+11
A-Side Mezzanine 1
Port 1
Port 2
Port 3
Port 4
2/Port N
2/Port N+8
2/Port N+4
2/Port N+12
A-Side Mezzanine 2 Port 1
Port 2
Port 3
Port 4
3/Port N
4/Port N
3/Port N+8
4/Port N+8
A-Side Mezzanine 3 Port 1
Port 2
Port 3
Port 4
3/Port N+12
4/Port N+12
3/Port N+4
4/Port N+4
B-Side Mezzanine 4 Port 1
Port 2
Port 3
Port 4
3/Port N+7
4/Port N+7
2/Port N-1
2/Port N-1
B-Side Mezzanine 5 Port 1
Port 2
Port 3
Port 4
2/Port N+3
2/Port N+11
2/Port N-1
2/Port N+7
B-Side Mezzanine 6
NIC only Port 1
Port 2 1/Port N-1
1/Port N+7