HP Onboard Administrator - Manual (Page 184)

Configuring the HP BladeSystem c7000 enclosure and enclosure devices 184
be re-signed by a certificate authority because the private keys are destroyed and recreated along with the
Onboard Administrator domain.
If the new certificate is successfully accepted and installed by the Onboard Administrator, then you are
automatically signed out. The HTTP server must be restarted for the new certificate to take effect.
Firmware update
CAUTION: When a firmware upgrade is in process, do not disconnect the Onboard
Administrator modules. Disconnecting these modules could render the Onboard Administrator
unusable.
The current firmware version installed on the Onboard Administrator, both Active and Standby, appears on
this screen. The current Onboard Administrator hardware version also appears on this screen.
Synchronize firmware
To synchronize the firmware on the active and standby Onboard Administrator to the same version of
firmware, click Synchronize Firmware. A firmware image is created from the flash contents of the Onboard
Administrator with the latest firmware version and is flashed to the Onboard Administrator with the oldest
firmware version. The Onboard Administrator being upgraded reboots after the firmware is flashed.
To use the Synchronize Firmware feature: